hydroblasting Archives - Raleigh Pressure Washing by MurCo Property Services

6 Reasons Why Resurfacing + Epoxy Coating Is Often the Best Solution

Tiffany — Mon, 15 Sep 2025 13:46:28 +0000

Owning a pool is one of life’s greatest luxuries, but over time, wear and tear can leave your once-sparkling oasis looking tired, stained, or even unsafe. Cracks, peeling paint, and rough surfaces don’t just affect appearance—they can shorten the lifespan of your pool and make maintenance a constant headache. Fortunately, you don’t have to start from scratch. Resurfacing paired with epoxy coating is one of the most effective ways to restore both beauty and durability to your pool. Here are 6 reasons why resurfacing and epoxy coating may be the right choice for you.

1. Restoration without full replacement

A pool’s shell (especially if made of concrete or plaster) can often be sound despite visible surface ageing. Resurfacing fixes problems at the surface — such as peeling, staining, minor spalls or cracks — without needing to replace the whole shell. When you combine that with a high-quality epoxy coating, you get the appearance and performance of a new surface at a fraction of the cost of a total rebuild.

2. Long-term durability, especially with epoxy

Epoxy coatings are remarkably tough. They resist chemical damage (from chlorine, salt, algaecides, etc.), UV fading, and fluctuating temperatures. When applied properly over a well-prepared surface, epoxy can last 7-10 years or more. That means fewer touch-ups, less rework, and less hassle over time.

3. Aesthetic improvement & clean, fresh finish

Let’s be honest: pools look much more inviting when their surfaces are clean, smooth, and vibrant. Epoxy coatings deliver a thick, smooth, glossy, tile-like finish. They can make old stains, fading, or uneven patches disappear. Plus, a freshly coated pool looks much more attractive to family, guests… and potential buyers, if you ever decide to sell.

4. Protection against further damage

Resurfacing plus epoxy doesn’t just cover problems—it protects against them. A proper coating forms a barrier that helps prevent water intrusion, resists algae and stain build-up, and shields the shell from degradation caused by freeze-thaw cycles, constant moisture, and chemical attack. That means fewer problems down the road, like leaking, scaling, or structural distress.

5. Easier maintenance

A smooth, sealed surface is much easier to keep clean. Algae and grime have fewer places to hide; chemicals distribute more evenly; and buildup is easier to brush or vacuum off. Regular maintenance becomes less work, less expensive, and less stressful.

6. Cost vs. value

While epoxy coating isn’t free, the value it delivers is strong. Lower lifetime costs, longer intervals between maintenance or refinishing, and improved enjoyment all add up. Resurfacing with epoxy often gives more “bang for the buck” than repeated paint jobs, or worse, full rebuilds.

What Does the Process Involve?

To reap all those benefits, the job has to be done right. Here’s what a high-quality resurfacing + epoxy coating process typically includes:

Assessment of the pool shell to determine if structural issues exist.
Surface preparation, which often means pressure washing or hydroblasting to remove old paint, chalking, algae, stains—and to give the surface proper “tooth” for adhesion.
Drying and patching any cracks or imperfections so the surface is sound and smooth.
Application of epoxy coating (or, in some cases, an interim paint coat). The coating must be applied evenly, in correct environmental conditions (temperature, humidity), to ensure adhesion and finish.
Cure and care, meaning allowing the coating to fully dry and harden before filling and putting the pool back into use, plus following any manufacturer or contractor care guidelines to preserve the finish.

Epoxy vs Traditional Pool Paint

It’s also worth comparing epoxy to more traditional pool paints (which are less expensive up front):

Feature	Epoxy Coating	Traditional Pool Paint
Lifespan	~7-10 years (or more, with good prep)	2-3 years, depending on exposure, chemicals, and maintenance
Finish & appearance	Thick, glossy, tile-like, smoother, and more luxurious	Can look good, but thinner, less durable, may fade or wear unevenly sooner
Resistance to chemicals / UV / wear	High	Moderate to good (depends on paint quality)
Up-front cost	Higher	Lower

If your goal is a long-term, beautiful, low-maintenance pool, epoxy almost always wins out. If you need a quick, budget-friendly solution, painting may work—but with the understanding that you’ll likely need to do it again sooner.

Why Choosing the Right Contractor Matters

Even the best epoxy coating won’t perform well if prep work is sloppy, environmental conditions are wrong, or the coating is applied incorrectly. Key qualities to look for:

Experience in pool resurfacing and coatings
Use of high-quality materials (epoxy compounds designed for pools)
Strong surface prep—pressure wash or hydroblasting to remove old coatings, stains, and ensure adhesion
Clear estimates and timelines, and a proven track record
That’s where specialized pool restoration services shine—they do the job right the first time.

If your pool has started to fade, crack, or simply doesn’t feel like the clean, inviting oasis you once enjoyed, resurfacing combined with an epoxy coating is one of the best and smartest solutions. You get restored beauty, durability, reduced maintenance, protection against future damage, and strong value over the long run.

Contact Raleigh’s Pool Resurfacing Pros

When you’re ready to restore your pool properly, contact MurCo Property Services. With decades of experience in hydroblasting, pool coatings, resurfacing, and sealants, they have the expertise to bring your pool back to life.

Let MurCo evaluate your pool, walk you through the best options, and deliver a finish you’ll enjoy for years to come. Get your free estimate today—your pool deserves nothing less.

The post 6 Reasons Why Resurfacing + Epoxy Coating Is Often the Best Solution appeared first on Raleigh Pressure Washing by MurCo Property Services.

Why Hydroblasting Delivers the Best Results for Pool Resurfacing

Tiffany — Thu, 19 Jun 2025 19:28:03 +0000

When it comes to restoring a worn or damaged swimming pool, the success of your resurfacing project depends heavily on one critical step—surface preparation. No matter how high-end your new pool coating is, it won’t last if it’s applied over layers of old paint, algae residue, or failing concrete. That’s where hydroblasting comes in.

Hydroblasting is a powerful, precise, and environmentally responsible method of preparing a pool for resurfacing. Unlike traditional techniques like sandblasting or acid washing, hydroblasting uses ultra-high-pressure water to strip away old coatings, scale, and contaminants, leaving behind a clean, textured surface that’s ideal for bonding with new materials. In short, hydroblasting sets the stage for a pool finish that lasts for years—not months.

What Is Hydroblasting?

Hydroblasting (also called water blasting or UHP water jetting) uses water pressurized to as much as 40,000 PSI to clean and prepare surfaces. For pool resurfacing, this technique allows professionals to:

Remove multiple layers of old paint or plaster
Erase tough buildup like calcium deposits, rust stains, or algae
Expose sound concrete or gunite for better coating adhesion
Avoid damage to surrounding landscaping or structures

The result is a surface that’s uniformly clean and microscopically rough—perfect for long-term adhesion of plaster, epoxy, or elastomeric pool coatings.

Why Traditional Pool Resurfacing Methods Fall Short

Many pool owners are familiar with methods like grinding, chipping, acid washing, or sandblasting, which have been standard in surface prep for decades. However, each of these methods comes with drawbacks:

Acid washing can’t remove old paint or deeply embedded grime, and it introduces hazardous chemicals into the environment.
Sandblasting is messy, creates airborne silica dust (a known health hazard), and may erode concrete if not carefully applied.
Grinding and chipping are labor-intensive, noisy, and uneven, often damaging the pool structure itself.

None of these techniques can match hydroblasting when it comes to achieving a clean, damage-free, and bond-ready surface. In fact, poor surface preparation is one of the leading causes of blistering, peeling, and flaking in pool finishes—problems that often appear within a year or two of resurfacing.

Hydroblasting virtually eliminates that risk.

The Hydroblasting Advantage: Better Bonding, Better Results

Pool coatings—whether plaster, pebble, quartz, epoxy, or rubberized paint—require a strong bond to the substrate beneath. If even a thin film of paint or algae remains on the pool’s surface, it can act as a barrier and prevent that bond from forming.

Hydroblasting creates what’s known as a mechanical profile, a slightly rough texture at the microscopic level. This profile gives new coatings something to grip, making them more likely to adhere properly and last longer. In many cases, hydroblasting can even expose aggregate or bring the surface down to structurally sound concrete, which is ideal for starting fresh.

If you’re investing thousands of dollars into a pool resurfacing project, skipping hydroblasting or using a shortcut technique can be a costly mistake. Starting with a poorly prepped surface often means you’ll be repainting or replastering within a few years—or worse, dealing with premature cracks, bubbling, and leaks.

A Cleaner, Greener Process

Hydroblasting isn’t just effective—it’s also one of the most environmentally friendly ways to prepare a pool for resurfacing.

Unlike chemical stripping or acid washing, hydroblasting uses only water—no toxic chemicals or dusty abrasives. And since the process produces minimal waste (mainly water and stripped material), it’s safer for your landscaping, nearby plants, and the crew performing the job.

At MurCo Pressure Washing, we use state-of-the-art hydroblasting equipment that includes advanced containment systems to collect debris and wastewater, preventing it from entering storm drains or contaminating your property. It’s a responsible choice for your pool and for the environment.

The Long-Term Value of Doing It Right

Pool resurfacing is a significant investment—one that should last you a decade or more with the right materials and preparation. Skimping on surface prep may save a few dollars up front, but it usually results in costly repairs or total do-overs down the line.

Hydroblasting gives you peace of mind that the job is done right from the beginning. When paired with a high-quality finish and professional application, the results are smoother, stronger, and longer lasting. You’ll enjoy a beautiful, low-maintenance pool for years without worrying about peeling paint or rough, uneven surfaces.

Ideal for Any Type of Pool

Hydroblasting is suitable for all types of pool surfaces, including:

Gunite and concrete pools
Fiberglass shell pools (with adjusted PSI)
Pools with multiple layers of old paint
Commercial or residential pools of any size

No matter the age or condition of your pool, hydroblasting gives technicians full control over the cleaning and prep process, ensuring no area is missed or under-prepped.

Professional Results from MurCo Pressure Washing

At MurCo Pressure Washing, we bring years of experience and proven expertise to every pool restoration project. Our hydroblasting services are designed to give you the cleanest, strongest foundation possible for your resurfacing investment. We combine precision equipment, eco-conscious practices, and industry knowledge to deliver results that not only look amazing—but stand the test of time.

From hydroblasting to surface painting and epoxy coating, MurCo. is your one-stop solution for restoring pools of all shapes and sizes. Whether you’re refreshing a faded backyard pool or bringing a commercial facility back to life, we can help you make it happen with confidence and care.

Ready for a Pool That Looks Brand New?

Don’t trust your pool restoration to just anyone. The difference is in the details—and hydroblasting is one detail you can’t afford to overlook.

MurCo Pressure Washing offers expert hydroblasting and professional pool resurfacing services throughout the greater Raleigh, NC area. Let us help you bring your pool back to life with lasting beauty, better performance, and superior surface protection.

Request a free quote for pool restoration and painting. There’s no obligation—just an easy way to start your project with the professionals who get it done right the first time.

Your dream pool is only a click away. Let MurCo. help you make it a reality.

The post Why Hydroblasting Delivers the Best Results for Pool Resurfacing appeared first on Raleigh Pressure Washing by MurCo Property Services.